Prospects from GIB Stoppers when Skimming Walls

Buying a house is probably one of the biggest decisions that you will make in your life. However, home ownership also requires proper maintenance from time to time. Just like you take your vehicle for regular servicing so its engine can perform healthy and happy. You need to perform some maintenance tasks to keep your house interior and exterior in a good shape.

Sometimes you will end up with imperfections like holes, rough patches and scuff marks on your interior wall, these are usually visible over time and they can put off your renters and potential buyers. In situations like this, you will want to improve the appearance of your walls. You should consider getting a professional wall skimming service to give your décor a flawless look who follow typical GIB fixing laws in NZ.

In this post, you will learn about the right procedure for wall skim coat service in your house:

Wallpaper Removal

If you choose to remove wallpaper yourself, start by wetting layers. You should soak the layers of wallpaper into water. To speed up this process use a wallpaper steamer or wet sponge. Make sure to repeat this process several times. Strip down big pieces of paper by using a scraper. This way you can complete the process in less time.

If you have difficulty to take off any persistent layers just leave it as it is. You can apply plaster over it if those layers are persistent enough. Just remember to apply the right preparation process to get effective results.

Prepare the area before starting GIB stopping

Make sure to clear up your space before your Gib stopper starts the work.

  • First of all, remove all of the valuable items like wall hangings, small items and ornaments from the room.
  • Move all your large furniture in the middle of the room.
  • Make sure to cover it with sheets to avoid accumulation of dirt over it.
  • It is better to let your gib stopper access to the whole area in one go. If you choose to break the task into small parts it can increase the total time required for Gib stopping.

Install steel slim lines to external corners

If you hire experienced Gib stoppers, they will choose to install steel slim lines to corners that are sticking out into the room. These are external corners that provide a square profile to your space. They don’t give a traditional timer corner bead appearance or rounded corner look to the interior walls.

Prepare your ceilings or walls for skimming

Before your Gib Stopping experts start their work make sure to light sand the area to get rid of any debris. Usually, your specialist will use a good quality oil based pigmented sealer (OBPS). It consist of redesigned oils which is why it smell really strong while applying on the surface. That is why experts recommend not to use the affected area till the process is over.

This sealer helps to seal the old adhesives by creating a bond and stabilizing the plasterboard. The specialists mainly aim to stop the leaching out of any substance through the plasterboard. As it can react with the skim coats after skimming walls.

Use paper tape to create a defined line in internal corners

The experts may use paper tape to redesign and re-enforce the internal corners. It will form a defined line in internal corners to enhance the overall appearance of your space. Plus, application of paper tape strengthens the corners. If framing or plasterboard appear out of line in any area, the specialists are required to straighten it. This is the only effective way to reduce the negative look of the defect. Some houses also have a ¼ round corner beads covering the internal corners. In such cases the homeowners must ensure to remove such beads before gib stoppers start their job.

Apply paper based perforated re-enforcing tape to joins

By using re-enforcing tape in joins you can avoid any cracks on plastered surface. That’s why specialists prefer to use a perforated re-enforcing tape that is paper-based. They use high adhesive plasters to apply this tape. As it helps in forming a strong bond in comparison to fibre re-enforcing tapes.

Skimming Walls

The professional GIB stoppers in Auckland, use highly adhesive compounds to apply the first skim coats. As such compounds make the surface harder and stronger. After this second skim is used to cover any cracks or scratches in the nail or paper holes. Once the second coat settles the specialist look for the presence of pin holes. In cases like this, they apply additional coats to fully cover the affected surfaces.

The las skim coat should cover the whole surface and must be in a compound that air dries. Again the specialist take care to cover up all the pinholes. After this the surface is light sand using a 500w halogen floodlight to perform light checks. This helps to spot the areas that are not prepared for skimming.

Sometimes pinhole may be visible even after final sanding. Then, it is best to seal the complete area so you can easy touch the pin holes. It will not lead to formation of any demarcation lines and affect the treated surface.

Creating straight walls

When it comes to skim coating an old house it can be really difficult. It is because there several deviations in framing in older homes. In that case, the wall skimming process may give a smooth texture to the surface. But it may not straighten the walls or correct the deviations in framing. However, the specialist can feather out any curve that is clearly visible due its shape.

Set appropriate time frames

Skimming walls is a really time consuming procedure. As the stopper has to perform Gib fixing and stopping on the same surface after wall skimming. GIB stopping is of utmost importance in various areas and it can often take several visits of the specialist to complete the task effectively. So, when you need a wall skimming service make sure to set generous timeframes. Normally, skimming walls in one room can take up to 1 week. But if there are two specialists it can take one and a half weeks to skim half portion of a house or more.

gib stoppers, Skimming Walls | March 28, 2019 | John Smith


Why GIB stopping is of utmost importance in various areas?

gib stopping process

When it comes to designing the interior of a building the important part is installing plasterboard properly. It gives a beautiful look to the interior walls of buildings. Without correct plasterboard installation or relining it is difficult to get a fantastic finish on the wall.

Thus, Gib stopping is of utmost importance to give an impeccable finish to your wall. Not just this, Gib Stopping help in getting a wonderful finish on various places. If you have competitive skills you can consider doing it yourself.

But in order to get the best results for this job, it is usually best to hire a professional tradesmen. They will follow the correct GIB fixing laws to produce a wonderful finish within your budget. Just make sure to choose reputed GIB stopper that you can rely on.

Read on to find out the importance of Gib Stopping for various places.


When it comes to renovation or building a new home, the bathroom is one of the most expensive room. In fact, today bathrooms are becoming one of the most beautifully designed part of the house. There is no doubt that it requires a lot of detailing to design a glamorous bathroom.

Whether it is of a relatively small size you will want it to look a beautiful place where you can relax and refresh. Hence, it is important to hire skilled tradesmen to get a fantastic finish in your bathroom.

A professional plastering team can effectively complete the job on the accurate time. They will plaster your bathroom using the highest standards at the right day. They will even make a precise and convenient schedule to stay punctual while working on the project. So, you don’t need to worry about facing any expensive delay in completion of the job.

Office premises or Retail building

Whether you are looking to renovate and revitalize your office area or commercial building. Gib stopping is a very important part of the process. So you will need to get it done with precision and high quality tools. And, this is where it is advisable to hire an experienced Gib Stopping company. Their skilled operators will complete your plastering job within a reasonable time. You ought to make sure that the tradesmen work carefully without damaging the fittings. They must be careful while using expensive items.

Renovations in occupied residential places

If you want to renovate an occupied residential house, you need highly qualified tradespeople. They will complete the entire renovation project on time.

Also, they will make sure that the interior plastering or gib stopping project is done without mistakes. Their specialised crew will schedule the completion of project according to your convenience. Additionally, when it comes to revitalizing your occupied residential it is important to maintain cleanliness.

This is where it is best to get help from reputed Gib Stopper. They will make sure to work on the project while protecting your furniture, floors and electronic items. Thus, the work can get complete without creating much hassle for the owners.

Decorating new house

If you are thinking of decorating your new house interior, you will definitely need excellent GIB stopping and plastering. They will use a highly adhesive plaster for first coats so they are properly bedded. While the remaining coats of plaster will be applied using the most flat contour.

Once it is done, a GIB compound that is sandable is applied on the joint. This helps in giving a smooth texture around the joint. After the surface is properly sanded, halogen light is used to touch up any marks that can be visible after painting.

gib stoppers, Skimming Walls, gib stoppers, plastering gib | March 4, 2019 | John Smith